XGS-A HYDRAULIC LINER HANGER
The XGS-A is hydraulically set by applying pressure through the run-in string. A setting ball is circulated or dropped to a ball seat built into the landing collar. Applied pressure acts on the internal piston and moves slips up the cone to the set position.
Features
1. Used in slim hole, sidetracking wells inside casing.
2. The XGS-A is to be set hydraulically, applicable to different wells.
3.Instead of using piston, the cylinder directly moves the slips up the cone to the set position.
4. The sealing element is made of nitrile/fluorine rubber for higher pressure and temperature ratings.
5. Main parts are fabricated with high-strength alloy steel providing high
burst/collapse resistance.
Technical Parameters
|
Specifications, mm
|
Φ139.7×Φ101.6/Φ88.9
|
|
Rated Load, t
|
30
|
|
Sealing Capacity, MPa
|
25
|
|
Shearing Pressure of Pins, MPa
|
7～8
|
|
Casing Wall Thickness, mm
|
7.72
9.17
|
|
Casing Weight, kg/m
|
25.30
29.76
|
|
Body Max O.D., mm
|
117
|
|
Body Min I.D., mm
|
85
|
